left_shade

EVS-100 Camera:


  • Hermetically sealed package with dry nitrogen purge prevents moisture and dust from entering camera.

  • Integral window heaters for operation in icing conditions.

  • Integral sun sensor to protect the sensor when the sun is in the field of view.

  • Advanced image processing to optimize the image during all phases of flight.

  • Completely autonomous operation to reduce pilot workload.


Specifications:
Sensor: LWIR (8-14 microns) with 320 x 240 resolution
HFOV: 40 degrees Horizontal X 30 degrees Vertical
Power: 12 or 28 VDC, < 0.5 A for Sensor, < 2 A for Heaters
Package: Self Contained Aerodynamic Pod
Output: RS-170 Video/NTSC
Processing: Pitch Corrected Automatic Gain Control
Sun Sensor: Included
Mounting: Similar to any other antennae mount.
Limitations Altitude: 25000' Airspeed: 250 KIAS (not KTAS)
PDF Forward.Vision® EVS-100 Spec Sheet*

Physical:
Weight of EVS-100: 1.1 lbs
Dimensions: 3.77"W X 8.68"L X 2.5"H

Export Regulations: license required, must meet US requirements

   

EVS-600 Camera:


  • Only EVS with Dual wavelength on the GA market - Combines infrared image with visible light

  • Hermetically sealed package with dry nitrogen purge prevents moisture and dust from entering camera.

  • Integral window heaters for operation in icing conditions.

  • Integral sun sensor to protect the sensor when the sun is in the field of view.

  • Advanced image processing to optimize the image during all phases of flight.

  • Completely autonomous operation to reduce pilot workload.

Specifications:

Sensor: LWIR (8-14 microns) with 320 x 240 resolution

CMOS Visible light sensor fused to LWIR image

FOV: 40 degrees Horizontal X 30 degrees Vertical
Power: 12 or 28 VDC, < 0.5 A for Sensor, < 2 A for Heaters
Package: Self Contained Aerodynamic Pod
Output: RS-170 Video/NTSC
Processing: Pitch Corrected Automatic Gain Control
Sun Sensor: Included
Mounting: Similar to any other antennae mount.
Limitations Altitude: 25000' Airspeed: 250 KIAS (not KTAS)
PDF EVS-100 & EVS-600 Spec Brochure

Physical:
Weight of EVS-600: 1.2 lbs
Dimensions: 3.77"W X 8.68"L X 2.5"H

Export Regulations: license required, must meet US requirements


Max-Viz, Inc.

EVS-1500 Camera
Specifications:

General:

Lightweight, solid state, uncooled thermal imaging camera with advanced image processing software

Sensor Technology: Un-cooled solid state microbolometer
Field of View:

Pilot selectable dual field of view - 53 x 40 or 30 x 22.5 degrees Optical zoom – no loss in resolution

Resolution: 320 x 240 pixels
Size:

Camera: 2.8” (71mm) diameter x 6.8” (172 mm) length

Power Module: 3.75” (95mm) width x 5.0” (127mm) height x 2.25” (57.2mm) depth

Weight:

Camera: 2.5 Lbs (1.13kg)
Power Module: 2.5 Lbs (1.13kg)

Power:

Electronics: 10 watts typical; 15 watts peak at 28VDC
Environmental: 50 watts average; 125 watts maximum with heater

Qualifications:

Certified to DO-160E
Fully EMI/RFI and power conditioned

Reliability: 15,000 hours MTBF
PDF   EVS-1500 Spec Sheet*
 
*requires FREE Acrobat Reader to view PDF files. Get Adobe Reader  

LIMITED WARRANTY

Forward Vision warrants that its products will be free from defects in workmanship and material during the applicable "Warranty Period."

Forward Vision's warranty is offered on a Return-to-Factory basis.  Forward Vision shall promptly rebuild and return to service or, at its option, replace each product that fails to function in accordance with the Product Specifications during the Warranty Period due to a defect in workmanship or materials, and redeliver the product to the customer ex-works Russell, PA provided that:  (a) the customer promptly notifies Forward Vision of the failure in writing no later than one (1) week after the expiration of the Warranty Period; and (b) on request by Forward Vision, the customer returns the defective product to Forward Vision in accordance with Forward Vision's return materials authorization procedures at the customer's risk and expense.  Costs incurred for the removal of equipment from aircraft, including travel and living costs, fault isolation, inbound shipment and item reinstallation are not covered by this warranty.

Forward Vision shall have no liability to rebuild and return to service or replace a product if (a) the product is not properly installed or maintained; (b) the product is operated under abnormal operating conditions; or (c) the product is improperly used or used for purposes for which it is not intended, in accordance with the Forward Vision Installation and Maintenance Manuals.  Further, Forward Vision shall have no liability to rebuild and return to service or replace a product if the Max-Viz identity code(s) on the product has been altered, defaced or removed.

The Warranty Period for each product (EVS-100 and EVS-600) is two (2) years from the date of shipment to customer.  The Warranty Period for a rebuilt and returned to service or replaced product is three (3) months and will expire on either the expiration of three (3) months or the expiration of the original warranty for the product, whichever is later.

If a reported failure to function is not due to a defect in the product and no fault is found, then the customer shall pay Forward Vision a three (3) hour handling and evaluation charge at Forward Vision's standard charges for such services than in effect.

Keep up to date with Forward.Vision
Join Our E-Mailing List:

 

 
risht_shade  


Camera | Displays | Installations | STC's | Press | FAQ | LinksSales | Dealers | Export | Contact


Copyright © 2009.  All Rights Reserved
Forward.Vision®
1276 Route 957, Russell, PA  16345  ·  phone 814-757-5476  ·  fax 814-757-5631  ·
 info@forward-vision.net